Monday, January 25, 2010

Change Ubuntu IP Address from DHCP to Static or Vice Versa - HowTo

The default network setting in Ubuntu (or Debian) is to use DHCP.  Often, however, it is desirable to use a static IP address and settings.  To change your network configuration from DHCP to static follow these steps.

Open a terminal session and enter:
sudo nano /etc/network/interfaces
Two network interfaces should be listed, lo and eth0:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

Change eth0 to your desired settings, such as:
auto eth0
iface eth0 inet static

Save the file and close using Ctl+X, Y, Enter.

Restart the network to apply the new setting, with this command:
sudo /etc/init.d/networking restart
Verify your network settings with:
See also

No comments:

Post a Comment